SL900 GNSS Receiver
SL900 GNSS Receiver

Manufacturer: SATLAB GEOSOLUTIONS

Description: The SatLab GNSS receiver is a high-precision that performs even under the most demanding conditions. With this GNSS receiver, it is capable of delivering highly accurate GPS data in real-time to any device via a Bluetooth connection. Satellite correction service, compact and lightweight, this GNSS is one of the most flexible solutions that promise positioning reliability.

Data Specifications

GNSS

Signal Tracking:

  • GPS (L1C/A, L1PY L2C, L2P, L5)
  • GLONASS1 (L1C/A, L2C, L2P, L3)
  • BeiDou2 (Bl, B2, B3)
  • Galileo3 (El, E5AltBOC, E5a, E5b, E6)
  • IRNSS (L5)
  • QZSS (L1C/A, L1C, L2C, L5)
  • SBAS (L1, L5)
  • On module L-Band

No. of Channels:

  • 448

 

MEASUREMENT PERFORMANCE

  • Real-time Kinematic: H: 8mm + 1ppm RMS / V: 15mm + 1ppm RMS
  • Network RTK: H: 8mm + 0.5ppm RMS / V: 15mm + 0.5ppm RMS
  • Post Processing Kinematic: H: 8mm + 1ppm RMS / V:15mm + 1ppm RMS
  • High-precision Static: H: 2.5mm + 0.1ppm RMS / V: 3.5mm + 0.4ppm RMS
  • Static and Fast Static: H: 2.5mm + 0.5ppm RMS / V: 5mm + 0.5ppm RMS
  • DGPS Position Accuracy: H: 30cm RMS / V: 50cm RMS4
  • SBAS Position Accuracy: H: 50cm RMS / V: 85cm RMS
  • Code Differential: DGPS/RTCM
  • Initializing Time: 2-10s
  • Initializing Reliability: 99.9%
  • SmartLink (worldwide correction service) optional:
  • Adaptive on-the-fly satellite selection
  • Remote precise point positioning (20cm 2D, 30cm 3D Initial convergence to full accuracy typically 30 min, Re-convergence < 1 min
  • SmartLink fill (worldwide correction service) optional: Bridging of RTK outages up to 10 min (3 cm 2D)
  • Tilt Survey Performance: Additional horizontal pole-tilt uncertainty typically les than 10mm +0.7 mm/°tilt (2.5cm accuracy in the inclina -tion of 30° under ideal circumstances)

 

COMMUNICATIONS

Communication Ports:

  • Internal 4G Mobile Network
  • TDD-LTE/FDD-LTE/WCDMA/GPRS/GSM
  • Bluetooth: V2.1 + EDR, NFC, E-Bubble Wi-Fi: 2.4G ,802.11b/g/n
  • USB, TNC antenna port, SIM card slot,
  • TF card slot, DC power input (5-pin)
  • Internal Radio

SYSTEM

  • Operation System: Linux
  • Start-up Time: 3s
  • Data Storage: Circulating 16GB Internal Storage; Supports 32G SD card

DATA MANAGEMENT   

  • 20 Hz Update (up to 100 Hz6)
  • CMR, RTCM2.X, RTCM3.0, RTCM3.2
  • GNS, Rinex

GENERAL

Environmental

  • IP67 environmental protection
  • Waterproof to 1m (3.28ft) depth
  • Temporary Submersion
  • Shock resistant body to 2m (6.5ft) pole drop
  • Temperature:
    -40°C to 65°C Operating
    -40°C to 85°C Storage

Physical Properties

  • Size: 170mm x 95mm
  • Weight: 1.2kg including battery
  • Battery: 5,000mAh Lithium-Ion Battery
  • Operation Time: 10 hours (RTK Rover)

 

Note
1 Hardware ready for L3 and L5.
2 Designed for BeiDou phase 2 and 3, B1 and B2 compatibility. B3 conditionally supported and subject to change.
3 E1bc support only. Gallilei E6 will available by upgrading firmware  in future .Hardware capable of tracking E6.
4 Code deferential accuracy also depend on antenna and other component not only motherboard dependent accurancy.
5 Optional: Frequeny 865-867 MHZ, transmitting power 0.1w-1w adjustable
6 Optional

Other products